The MagnaFlow Stainless Steel Catalytic Converter that will work on the 2003 Mitsubishi Eclipse with 3.0 Liter V6 is the MagnaFlow Stainless Steel Catalytic Converter - Universal - California Approved, item # MF41005. This is the rear catalytic converter only.
The 2003 Mitsubishi Eclipse with 3.0 Liter V6 also has a front pre-converter and a rear pre-converter. The replacements for those parts are the MagnaFlow Stainless Steel Direct-Fit Catalytic Converter, front pre-converter, item #... view full answer...
I contacted our representative at MagnaFlow about the differences in the metallic and ceramic catalytic converters.
The representative informed me that the metallic catalytic converters, like part # MF59956 are a bit stronger and would be good for applications where the catalytic converter is close to the header as they can handle more heat. The metallic ones are usually used on OBD1 applications.
The ceramic catalytic converters, such as part # MF99659HM, are not as strong and usually... view full answer...
If you have the V6 3.3L Supercharged engine you will have two catalytic converters. There is one on the drivers side towards the front and one on the passenger side towards the front. The drivers side would be MagnaFlow Catalytic Converter, part # MF49478, and the passengers side would be MagnaFlow Catalytic Converter, part # MF49477.
If you have the V6 3.3L normally aspirated engine you will have a total of 4 catalytic converters. The two in front on the drivers and passenger side and... view full answer...
For starters, let's review the exhaust system on your 2003 Ford Mustang with the 3.6L v6 engine first. From the factory you have a total of four catalytic converters and four oxygen sensors (o2). There are two oxygen sensors directly above the first set of catalytic converters which are called upstream sensors and two oxygen sensors in the middle of the last set of catalytic converters which are called downstream sensors. I have attached a photo of this for you.
The MagnaFlow Stainless... view full answer...
Typically catalytic converter contains two or more ceramic substrates, coated with a combination of Platinum, Palladium and Rhodium and a Ceria based wash coat, packed into a stainless steel housing. There is a certain amount of precious metals that need to be in a catalytic converter to pass inspection.
That being said, there is still plenty of precious metals in aftermarket catalytic converters like the MagnaFlow Converter # MF49461 you're looking at. I do not know if it's more or less... view full answer...
I recommend the Magnaflow Universal Catalytic Converter # MF447104 for your 2009 Suzuki XL7 with the 3.6L engine. This catalytic converter uses 2" inlet and outlets and is constructed of stainless steel. There is also no bung for the O2 sensor as yours is in the exhaust tubing and not the catalytic converter. view full answer...
From the information I was able to obtain, the item you selected, MagnaFlow Stainless Steel Catalytic Converter, part # MF23453, will fit your 1997 Chevrolet C/K Series with 5.7 liter motor.
The # MF23453 Catalytic Converter is 49-State legal, and is legal in the state of Virginia. This catalytic converter is not legal in the state of California. view full answer...
Yes, the MagnaFlow Stainless Steel Catalytic Converter - Universal, item # MF59959, can be installed in either direction. If a catalytic converter must be installed in a particular direction there will be markings on the outside of the converter itself.
I have linked an FAQ article on catalytic converters. view full answer...
The catalytic converter on your 1994 Ford F-350 with the 7.3 V8 diesel engine will be located directly after the downpipe if present. I say if present as it is a fairly common part to remove on these engines because it will free up power. The down pipe is a part of the exhaust system that connects to the turbo exit. Simply follow the turbo exit down under the cab until you find the catalytic converter or catalytic converter delete pipe. Please note that you will need to have access under... view full answer...
For your 1987 Mercury Cougar, we have the MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit # MF23366 which is a bolt on fit and I believe has the piece you are referring to. The MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit # MF93360 comes with the additional pipe if that is what you were referring to. view full answer...
Depending on which motor your 1996 Ford Explorer is equipped with will depend on how many and which catalytic converters you will need.
If you have the V6 4.0 liter motor, you will need to replace the the front and rear converter. For this we have the MagnaFlow Stainless Steel Catalytic Converter, part # MF23313, (49 state approved) which is a direct fit replacement.
If you have the V8 5.0 liter motor, you will need to replace a total of 4 catalytic converters. For the driver side front,... view full answer...
There are indeed two catalytic converters on your 2004 Chevrolet Tahoe built into the y-pipe just after the exhaust manifold. According to my research there are four oxygen sensors in total on your Tahoe, one before the catalytic converter and one after the catalytic converter on each side. The MagnaFlow Heavy Metal Loaded, Stainless Steel Catalytic Converter part # MF99006HM can be used to replace the factory catalytic converters however, it will be best if you leave the factory oxygen... view full answer...
The MagnaFlow Ceramic Catalytic Converter part # MF49575 is a direct fit catalytic converter which means it will only fit Ford Explorers and Mercury Mountaineers from 2002 - 2004 with the 4.0L V6 engine. Therefore, the MagnaFlow Ceramic Catalytic Converter will fit six different vehicles. view full answer...
According to Magnaflow, the Stainless Steel Direct-Fit Catalytic Converter, # MF23684, will fit your 1990 Mazda Miata, but it is not CARB (California Air Resource Bureau) compliant. At this time we do not have a catalytic converter for your Miata that is CARB approved.
I have linked you to our series of FAQ articles about Catalytic Converters. view full answer...
There are two catalytic converters that fit a 2002 Lincoln Navigator with 4-wheel drive (so long as it has a 5.4L V8 engine) that we carry:
- MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit # MF93144
- MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit # MF93145
Both converters are direct replacements and will work for an '02 Navigator, but be aware they do require the original hangers and flanges to install. So if those were cut out then you would need to have them... view full answer...
For your 1993 Toyota Pickup, we have the MagnaFlow Stainless Steel Catalytic Converter # MF23886. This catalytic converter utilizes the OEM hangers and mounting flanges, so it will be a direct fit.
It should be noted that this product can not be shipped to California, Colorado, Maine, or New York. view full answer...
In order to have a complete exhaust system for your 2001 Chevy Suburban you will need a cat-back system like a MagnaFlow Exhaust System # MF15798. Instructions link attached.
When it comes to catalytic converters the general consensus is that a ceramic converter will be more efficient at removing unburnt fuel, but the metal converters will flow better, which might give more power.
The ceramic converters recommended for your car are the:
MagnaFlow Direct Fit Ceramic Catalytic Converter,... view full answer...
For your 2000 Ford F-250 with a 5.4L V8 gas engine, the only catalytic converter we carry that is California-compliant is the MagnaFlow Ceramic Catalytic Converter - Stainless Steel - Universal # MF29RP. This converter is CARB compliant. view full answer...
I am not entirely sure I understand what you are asking but the catalytic converters are the same for both the base and police interceptor models of a 2001 Ford Crown Victoria. If you need to replace these then you will need two MagnaFlow Stainless Steel Catalytic Converter part # MF23328. This converter is a direct bolt-on fit for both the base and police interceptor models. view full answer...
Yes, the MagnaFlow Heavy Metal Loaded, Stainless Steel Catalytic Converter # MF99205HM can be installed in either direction. However, it's recommended that the larger converter be used first and therefore it's better to install it with the part number that is visible on the part facing towards the front of the vehicle.
If a catalytic converter can only be installed one way there will be markings on it to indicate so. I've attached a help article on catalytic converters you may find useful... view full answer...
Go To Results